Xiaomi Bootloop - How to reset xiaomi android phones that often turn off themselves / die completely? We have to prepare a way to fix an android phone that can't turn on. If we are xiaomi cellphone users who like to tinker with the Android MIUI operating system on the smartphone with a variety of different MIUI ROM versions.
This is because the cause of xiaomi phones often turning off, xiaomi android phones bootloop (brick) or xiaomi phones that restart themselves continuously comes from installing ROMs that are not compatible with existing devices.
You should not be surprised if the xiaomi android phone you have comes to die suddenly and does not want to turn on again (bootloop) after you carry out a system upgrade or the like but do not use the appropriate ROM on the devive you have.
Many xiaomi cellphone users think that by flashing firmware or flashing rom can solve the problem of xiaomi cellphones often restarting themselves (xiaomi android cellphone turns off).
Even though you need to know that the android phone freezes / ngehang is not only a kind of Xiaomi Redmi 3 that cannot enter fastboot or download mode but there are many types.
Therefore, the admin will try to provide solutions for all xiaomi phones that are completely dead and always restart when trying to be turned on again. Let's just see a review of how to turn on a totally dead xiaomi cellphone in full below.
Bootloop Repair Tutorial or Often Die Alone on Xiaomi HP (All Series)
Basically, failure in the rooting or flash rom process, installing xposed / dolby atmos / viper can cause any type of xiaomi cellphone to experience sitting problems such as Bootloop, Softbrick or Hardbrick.
To be clearer and not mistaken in dealing with the problem of android phones completely dead and do not want to live, here we give a little difference between Bootloop and Harbrick:
The difference between Bootloop and Hardbrick on Xiaomi phones
- If Xiaomi Redmi 3 can be turned on but only up to the Mi Logo, it means that the Xiaomi phone we have is sitting Bootloop problem.
- If Xiaomi Redmi 3 can be turned on but only up to the Mi Logo and Reboot again it means that the Xiaomi phone we have is experiencing a Softbrick problem.
- If Xiaomi Redmi 3 cannot be turned on but can still be charged, it means that the Xiaomi phone we have is experiencing a Softbrick / Hardbrick problem.
- If Xiaomi Redmi 3 cannot be turned on and cannot be charged, it means that the Xiaomi phone we have is experiencing a Hardbrick problem.
Causes of Frequent Self-Death of Xiaomi Cell Phones
In addition, some of the things that cause xiaomi phones to often restart themselves are:
- There is damage to system files or applications on xiaomi phones
- Xiaomi phone conditions that have been rooted
- CPU / Smartphone processor that is too hot (overheat)
- Xiaomi RAM capacity is no longer available
- Android device application / system that may be affected by a virus
- Often install applications from unofficial parties
- Doing Custom ROM that does not match specifications
- Wrong in carrying out Xiaomi firmware flashing, and so on
How to reset xiaomi cellphone to fix the problem of android phones that often restart on their own and the most common and easy to do by yourself is the data wipe method.
The most important thing here before we carry out the data wipe method is to carry out a backup to secure important data in the xiaomi android smartphone that you have.
Because doing a data wipe will have the risk of losing all data in the internal memory of the android phone. To wipe data or reset xiaomi phones we enter MI Recovery mode by following the steps below:
How to Solve Xiaomi Smartphone Bootloop or Restart Yourself
- First turn off (turn off) the Xiaomi device that we have
- Then enter MI Recovery mode by pressing and holding the Volume up + Power buttons simultaneously until the recovery dish appears on the xiaomi phone screen
- Select English, in recovery mode. In addition, in recovery mode, use the Volume Up and Volume Down buttons to navigate (up and down), and use the Power button to determine the desired presentation.
- Select Wipe & Reset.
- After that, a display will appear like the following image
- Wipe Cache: Delete cache files in the Xiaomi device system.
- Wipe User Data: Delete user data.
- Wipe all Data: Delete all user data and application data (Factory Reset).
- Do one by one the commands above
Select Back to return to the main serving page after completing each process, after that select Reboot >> Reboot to System One (latest) to turn on the xiaomi cellphone normally. See how the results are, if it still doesn't work do the same method but another command.
However, if the above method is still unable to overcome bootloop, hardbrick, softbrick on Xiaomi Redmi Note 2 phones then there is nothing wrong if you try our next method.
Basically, how to overcome Xiaomi Redmi Note 2 android phones that are unable to enter the system and are only stuck on the Mi logo or Android logo, it is necessary to re-flash the ROM via PC or flashing ROM via fastboot mode.
Therefore, for this time we need a PC / computer device and also the determination to try it. However, if you are not sure about doing it, you should go to the xiaomi hp service center to overcome the xiaomi phone that is completely dead.
The reason you are doing this tutorial is "Do With Your Own Risk".
How to Fix Xiaomi Redmi Note 2 Android Phone Die Alone
- Steps - steps for re-flashing ROM via PC or flashing ROM via fastboot mode, including:
- Download Mi PC Suite first at the following link (http://pcsuite.mi.com/) then install it on our computer
- Download Mi Flash first at the following link (http://bigota.d.miui.com/tools/MiPhone20151028.exe) then install it on our computer
- Download Redmi Note 2 Fastboot ROM via the following link (http://en.miui.com/a-234.html). After that scroll down select the Redmi Note 2 Latest Global Stable Version Fastboot File Download
- The ROM file has the extension .tgz, extract the Fastboot ROM using extract software (eg WinRAR) then you will get a folder called "hermes_images_V6.7.7.0.LHMCNCH_20150826.0000.7_5.0_cn". Then extract it in an easy location such as D:\ or E:\. Make sure not to put it in a folder again, just exclusively on the D or E drive.
- After that open MiFlash.exe usually the location is in C:\Program Files\Xiaomi\MiPhone
- Then click Browse >> Find the location of the Redmi Note 2 Fastboot ROM that was extracted earlier (hermes_images_V6.7.7.0.LHMCNCH_20150826.0000.7_5.0_cn) >> select images >> OK
- Next to the Browse button is an arrow, click >> Advanced
- In the Fastboot script fragment click Browse >> find the hermes_images_5.9.18_20150826.0000.7_5.0_cn folder >> select flash_all.bat >> OK. This will format the entire phone including the data and files on it (clean install). For other settings leave it by default, don't tamper with it.
- Turn off your Redmi Note 2 cellphone by removing the battery then installing it again. In the off state, turn on the cellphone by pressing the Power button + Volume down button simultaneously, keep pressing until the cellphone vibrates and turns on, if it is alive, release both buttons, then your cellphone will enter fastboot mode.
- Connect the Redmi Note 2 cellphone to the computer using a USB cable
- Back in MiFlash, click Refresh, then the Redmi Note 2 cellphone will be detected.
- After that click Flash, the Redmi Note 2 flashing process will take place. Wait until the process is complete.
- If the flash process is complete (complete) then your Redmi Note 2 cellphone will automatically restart. Unplug the data cable that connects the phone to the computer, then wait for your Redmi Note 2 phone to turn on. This process usually takes a while, so just wait.
Fastboot ROM extract tips
Extract the fasboot ROM until you get a folder with the name of the ROM, the pattern folder hermes_images_V6.7.7.0.LHMCNCH_20150826.0000.7_5.0_cn. Well inside that folder there is an images folder, and some bat files. If you extract it and there is only one file, then you extract the file again until you get the ROM folder, not the files.
Conclusion
How to overcome xiaomi phones that often die on their own can all be applied to all types of xiaomi. Because flashing ROM through fastboot mode has been tried on xiaomi Redmi 1S, Redmi 3, Redmi Note, Redmi Note 2, Mi4i, and other Xiaomi phones.
Thus the article on how to fix xiaomi android phone that suddenly turns off itself. Hopefully our article is able to show a useful solution for your xiaomi cellphone that is completely dead, that's all and thank you
FAQ
A. What Causes Xiaomi HP bootloop?
Bootloop can occur due to several things, such as damage to system files or MIUI ROM, root failure, and others.
B. Why does the Xiaomi phone reboot for a long time?
The most common cause of long booting experienced by Xiaomi smartphone users is online shopping applications. Therefore, the first step you should try is to look for online shopping applications that are accidentally installed or intentionally installed and uninstall the application.
C. What to do when Xiaomi phone fastboot?
When Xiaomi is in Fastboot mode press the Power button + volume down. Wait for the HP to restart. When the MI logo appears release the button. Wait for the HP to finish loading the system.